Cisco IOS: Unable to delete line vty 5 15 on 6500 switch
Problem : Cisco IOS: Unable to delete line vty 5 15 on 6500 switch My running config showing the following line con 0 exec-timeout 15 0 line vty 0 4 no login line vty 5 […]
Problem : Cisco IOS: Unable to delete line vty 5 15 on 6500 switch My running config showing the following line con 0 exec-timeout 15 0 line vty 0 4 no login line vty 5 […]
Problem : IIS SMTP sudenly having problems, “The specific error code was 0xC00402C7.” We have an IP restricted relay on our web server, that is suddenly giving us problems when the webforms try to send […]
Problem : RightFax Receive failure (Phase B). How can I resolve a “Receive failure (Phase B)” error from RightFax 9.3 using a Brooktrout TR1034 family card? I’ve checked my configuration against the support docs at […]
Problem : Cant add route – bad argument All workstations on my network have NIC cards set to Class C – 192.168.0.0/32 with gateway 192.168.0.248 (Routing and Remote Win2k3 server – call it GW from […]
Problem : what does ar serial int and cr serial int stand for in a ppp connection I was wondering what the “AR serial int” and “CR serial int” stand for in the setup directions […]
Problem : NTDS KCC Errors with Event ID 1566, 1311 & 1865 Setup: IN our single domain there are 3 sites, each site has a subnet, Site 1 (HQ) has 2 domain controllers running Server […]
Problem : FSMO – The requested fsmo operation failed.The current fsmo holder could not be contacted I have a single domain … I added a bdc and transfered the RID (FSMO) using the operation master […]
Problem : How do i delete a static route on a HP Procurve 2626 Hi there How can I delete a static route on our HP Procurve 2626 switch. If I telnet in I can […]
Problem : The DNS server received a bad TCP-based DNS message from 192.168.128.5. The packet was rejected or ignored. The event data contains the DNS packet. Hello, I’ve been getting this message in my DNS […]
Question : Robocopy – network path asking for username and password i use robocopy for running backups. for one particular path, it’s asking for a username and password. here is the command in the batch file: […]
Question : why is udp needed ?why can’t a user program directly access ip why is udp needed ?why can’t a user program directly access ip plz answer this quest i’ll be very thankful Solution: why […]
WMLCLoud.com .