The Cisco DPC3939 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
How to hard reset (factory reset) DPC3939 :
You can hard reset your DPC3939 with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
DPC3939 default Login & Password, factory settings :
Default Gateway IP: 10.0.0.1
Default username: admin
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 10.0.0.1
DPC3939 router specifications :
System specs
CPU: n/a
RAM: 512 MiB
Flash: 128 MiB + 32 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (abgn)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
4 x Gigabit ports
USB-ports: 0
How to login to the DPC3939 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://10.0.0.1
You should be prompted with a login dialogue.
Enter the username: admin
and the password password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
