The Cisco Meraki MR18 router has 300mbps WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
How to hard reset (factory reset) Meraki MR18 :
You can hard reset your Meraki MR18 with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Meraki MR18 default Login & Password, factory settings :
If you have performed a reset of your Meraki MR18 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
Meraki MR18 router specifications :
System specs
CPU: 720 MHz
RAM: 128 MiB
Flash: 128 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (abgn)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
1 x Gigabit port
USB-ports: 0