The Cisco Meraki MX60W router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports. It also supports custom firmwares like: OpenWrt, LEDE Project
How to hard reset (factory reset) Meraki MX60W :
You can hard reset your Meraki MX60W with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Meraki MX60W default Login & Password, factory settings :
If you have performed a reset of your Meraki MX60W device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
Meraki MX60W router specifications :
System specs
CPU: 800 MHz
RAM: 512 MiB
Flash: 1024 MiB
Custom firmwares: OpenWrt, LEDE Project
Connectivity
WiFi: 300mbps (abgn)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0