How to hard reset (factory reset) RV120W :
You can hard reset your RV120W with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
RV120W default Login & Password, factory settings :
Default Gateway IP: 192.168.1.1
Default username: cisco
Default password: cisco
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
RV120W router specifications :
CPU: 300 MHz
RAM: 64 MiB
Flash: 16 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi throughput: n/a
1 x 100mbps port
4 x 100mbps ports
How to login to the RV120W :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: cisco
and the password cisco
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.