The Cisco RV215W router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
How to hard reset (factory reset) RV215W :
You can hard reset your RV215W with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
RV215W default Login & Password, factory settings :
Default Gateway IP: 192.168.1.1
Default username: cisco
Default password: cisco
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
RV215W router specifications :
System specs
CPU: n/a
RAM: 64 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
How to login to the RV215W :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.1.1
You should be prompted with a login dialogue.
Enter the username: cisco
and the password cisco
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
