The Cisco Valet M10 v1 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
How to hard reset (factory reset) Valet M10 v1 :
You can hard reset your Valet M10 v1 with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Valet M10 v1 default Login & Password, factory settings :
If you have performed a reset of your Valet M10 v1 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
Valet M10 v1 router specifications :
System specs
CPU: 300 MHz
RAM: 32 MiB
Flash: 4 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
Cisco M10 review (quick overview)
Here is the quick comparison of how the Cisco M10 compares to
other routers on our site
Average
29/100
Editor
76/100
WiFi
6/100
Hardware
7/100
Current price
$13.93
For a full list of routers and how they compare to the Valet M10 v1, check the
Router Buying Guide which will help you buy the most
price-competitive router.