The Cisco WAP321 router has 300mbps WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
It is also known as the Cisco Wireless-N Selectable Band Access Point With POE.
How to hard reset (factory reset) WAP321 :
You can hard reset your WAP321 with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
WAP321 default Login & Password, factory settings :
If you have performed a reset of your WAP321 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
WAP321 router specifications :
System specs
CPU: n/a
RAM: 64 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (abgn)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
1 x Gigabit port
USB-ports: 0