The D-Link DAP-1320 rev B1 router has 300mbps WiFi, N/A ETH-ports and 0 USB-ports.
It is also known as the D-Link Wireless N300 Range Extender.
How to hard reset (factory reset) D-Link DAP-1320 rev B1 :
You can hard reset your D-Link DAP-1320 rev B1 with ways bellow
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
D-Link DAP-1320 rev B1 default Login & Password, factory settings :
Default Gateway IP: 192.168.0.60
D-Link login instructions
Default username: admin
D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.60
D-Link DAP-1320 rev B1 router specifications :
CPU: 560 MHz
RAM: 64 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi throughput: n/a
How to login to the D-Link DAP-1320 rev B1 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and if it requires a password, leave it empty or try with admin / password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.