The D-Link DIR-600 rev C2 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
How to hard reset (factory reset) D-Link DIR-600 rev C2 :
You can hard reset your D-Link DIR-600 rev C2 with ways bellow
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
D-Link DIR-600 rev C2 default Login & Password, factory settings :
If you have performed a reset of your DIR-600 rev C2 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
D-Link DIR-600 rev C2 router specifications :
System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
D-Link DIR-600 review (quick overview)
Here is the quick comparison of how the D-Link DIR-600 compares to
other routers on our site
Average
27/100
Editor
76/100
WiFi
6/100
Hardware
1/100
Current price
$8.99
For a full list of routers and how they compare to the DIR-600 rev C2, check the
Router Buying Guide which will help you buy the most
price-competitive router.
