The D-Link DIR-850L rev A1 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
How to hard reset (factory reset) D-Link DIR-850L rev A1 :
You can hard reset your D-Link DIR-850L rev A1 with ways bellow
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
D-Link DIR-850L rev A1 default Login & Password, factory settings :
Default Gateway IP: 192.168.0.1
D-Link login instructions
Default username: Admin
D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
D-Link DIR-850L rev A1 router specifications :
System specs
CPU: 660 MHz
RAM: 128 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0
D-Link DIR-850L review (quick overview)
Here is the quick comparison of how the D-Link DIR-850L compares to
other routers on our site
Average
42/100
Editor
76/100
WiFi
20/100
Hardware
32/100
Current price
$40.00
For a full list of routers and how they compare to the DIR-850L rev A1, check the
Router Buying Guide which will help you buy the most
price-competitive router.
How to login to the D-Link DIR-850L rev A1 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.0.1
You should be prompted with a login dialogue.
Enter the username: Admin
and if it requires a password, leave it empty or try with admin / password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
