How to hard reset D-Link DWL-2000AP+ rev A1 router – Default Login & Password

The D-Link DWL-2000AP+ rev A1 router has 54mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the D-Link AirPlus Xtreme G+ 2.4GHz (802.11g) Wireless Access Point.
How to hard reset D-Link DWL-2000AP+ rev A1 - Default Login & Password

How to hard reset (factory reset) D-Link DWL-2000AP+ rev A1 :

You can hard reset your D-Link DWL-2000AP+ rev A1 with ways bellow
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

D-Link DWL-2000AP+ rev A1 default Login & Password, factory settings :

If you have performed a reset of your DWL-2000AP+ rev A1 device or not changed the defaults, you
be able to access it with the following settings
Default subnet mask:

D-Link DWL-2000AP+ rev A1 router specifications :

System specs
CPU: n/a
RAM: 8 MiB
Flash: 1 MiB
Custom firmwares: None
WiFi: 54mbps (bg)
WiFi bands
WiFi throughput: n/a
1 x 100mbps port
USB-ports: 0