The Cisco Meraki MX64W router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It is also known as the Cisco Small Branch Firewall Wireless Security Appliance.
How to hard reset (factory reset) Meraki MX64W :
You can hard reset your Meraki MX64W with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Meraki MX64W default Login & Password, factory settings :
If you have performed a reset of your Meraki MX64W device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
Meraki MX64W router specifications :
System specs
CPU: 1 GHz
RAM: 2048 MiB
Flash: 1024 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0
