Learn how to equip your ship with the essential Comspike Module and Conduction Grid in the Eye of the Storm mission with this Starfield guide.
Starfield Game Guide: How to Install the Comspike Module and Conduction Grid
Before you can make the jump to Bannoc IV, you need to install the Comspike Module and Conduction Grid onto your ship. This process might seem confusing at first, but with the right guidance, it becomes straightforward. Here’s all steps you need to take to install these modules.
- Speak with Delgado: After initiating the final mission with Delgado, engage in an initial conversation. Following this, turn your attention to Jazz, who stands next to Delgado. Choose the dialogue option “Mind helping me with my ship?” to progress.
- Open the Ship Menu: Once you’ve engaged Jazz, select the dialogue option “I’d like to view and modify my ships.” This action will open the ship menu, where you can make modifications and install modules.
- Access the Ship Builder: Within the ship menu, locate the Ship Builder option in the bottom right corner. Press the corresponding key or button to open the Ship Builder menu.
- Navigate to the Equipment Section: Once you’re in the Ship Builder menu, navigate through the options until you find the Equipment section. Click on it to access the available modules.
- Install the Conduction Grid: In the Equipment section, locate the Conduction Grid module, which should be available for free. Select it and choose a free spot on your ship to install it. Ensure that the module is firmly attached.
- Add the Comspike Module: After installing the Conduction Grid, proceed to add the Comspike Module. Similar to the previous step, select the Comspike Module from the Equipment section and find a free spot on your ship to install it.
- Confirm and Exit: Once both modules are successfully installed, confirm your modifications and exit the Ship Builder menu. The Comspike Module and Conduction Grid should now be attached to your ship.
By following these instructions, you should have no trouble installing the Comspike Module and Conduction Grid in Starfield‘s Eye of the Storm mission. Enjoy the game and may your journey through the Crimson Fleet storyline be filled with excitement and adventure!
Related:
