The Cisco AIR-AP1242AG-A-K9 router has 54mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the Cisco Cisco Aironet 802.11a/b/g Access Point.
How to hard reset (factory reset) AIR-AP1242AG-A-K9 :
You can hard reset your AIR-AP1242AG-A-K9 with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
AIR-AP1242AG-A-K9 default Login & Password, factory settings :
If you have performed a reset of your AIR-AP1242AG-A-K9 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
AIR-AP1242AG-A-K9 router specifications :
System specs
CPU: n/a
RAM: 32 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: 54mbps (abg)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
1 x 100mbps port
USB-ports: 0
