The Cisco WAP581 router has Gigabit WiFi, 1 N/A ETH-ports and 0 USB-ports.
It is also known as the Cisco Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN.
How to hard reset (factory reset) WAP581 :
You can hard reset your WAP581 with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
WAP581 default Login & Password, factory settings :
Default Gateway IP: 192.168.1.245
Default username: cisco
Default password: cisco
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.245
WAP581 router specifications :
System specs
CPU: 1.2 GHz
RAM: 256 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x N/A port
ETH
1 x N/A port
USB-ports: 0
Cisco WAP581 review (quick overview)
Here is the quick comparison of how the Cisco WAP581 compares to
other routers on our site
Average
41/100
Editor
60/100
WiFi
20/100
Hardware
45/100
Current price
$259.99
For a full list of routers and how they compare to the WAP581, check the
Router Buying Guide which will help you buy the most
price-competitive router.
How to login to the WAP581 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.1.245
You should be prompted with a login dialogue.
Enter the username: cisco
and the password cisco
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.