The D-Link DAP-1620 rev B1 router has Gigabit WiFi, ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1300 Mpbs.
How to hard reset (factory reset) D-Link DAP-1620 rev B1 :
You can hard reset your D-Link DAP-1620 rev B1 with ways bellow
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
D-Link DAP-1620 rev B1 default Login & Password, factory settings :
If you have performed a reset of your DAP-1620 rev B1 device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): dlink-XXXX,dlink-XXXX-5GHz
Default subnet mask: 255.255.255.0
D-Link DAP-1620 rev B1 router specifications :
System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
n/a
WiFi throughput: 1300 Mpbs
WAN
None
ETH
None
USB-ports: 0
D-Link DAP-1620 review (quick overview)
Here is the quick comparison of how the D-Link DAP-1620 compares to
other routers on our site
Average
31/100
Editor
66/100
WiFi
26/100
Hardware
1/100
Current price
$15.99
For a full list of routers and how they compare to the DAP-1620 rev B1, check the
Router Buying Guide which will help you buy the most
price-competitive router.
