The D-Link DI-754 router has 11mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
How to hard reset (factory reset) D-Link DI-754 :
You can hard reset your D-Link DI-754 with ways bellow
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
D-Link DI-754 default Login & Password, factory settings :
Default Gateway IP: 192.168.0.1
D-Link login instructions
Default username: admin
D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
D-Link DI-754 router specifications :
Custom firmwares: None
WiFi: 11mbps (ab)
WiFi throughput: n/a
1 x 100mbps port
4 x 100mbps ports
How to login to the D-Link DI-754 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and if it requires a password, leave it empty or try with admin / password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.