How to hard reset D-Link DSR-1000N rev A1 router – Default Login & Password

The D-Link DSR-1000N rev A1 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
How to hard reset D-Link DSR-1000N rev A1 - Default Login & Password

How to hard reset (factory reset) D-Link DSR-1000N rev A1 :

You can hard reset your D-Link DSR-1000N rev A1 with ways bellow
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

D-Link DSR-1000N rev A1 default Login & Password, factory settings :

Default Gateway IP: 192.168.10.1
D-Link login instructions
Default username: admin
D-Link router default password list
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.10.1

D-Link DSR-1000N rev A1 router specifications :

System specs
CPU: 500 MHz
RAM: 256 MiB
Flash: 32 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (abgn)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
2 x Gigabit ports
ETH
4 x Gigabit ports
USB-ports: 0

How to login to the D-Link DSR-1000N rev A1 :

Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.10.1
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.