The TP-LINK Archer C7 v2.x router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It is also known as the TP-LINK AC1750 Wireless Dual Band Gigabit Router.
How to hard reset (factory reset) Archer C7 v2.x :
You can hard reset your Archer C7 v2.x with ways bellow
Use web interface :
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
Use RESET/WPS button :
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
Archer C7 v2.x default Login & Password, factory settings :
Default Gateway IP: 192.168.0.1
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
Archer C7 v2.x router specifications :
CPU: 720 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: OpenWrt
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: n/a
1 x Gigabit port
4 x Gigabit ports
TP-LINK Archer C7 review (quick overview)
Here is the quick comparison of how the TP-LINK Archer C7 compares to
other routers on our site
For a full list of routers and how they compare to the Archer C7 v2.x, check the
Router Buying Guide which will help you buy the most
How to login to the Archer C7 v2.x :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
How to hard reset TP-Link WiFi router