The TP-LINK RE370K router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
It is also known as the TP-LINK AC1200 Wi-Fi Range Extender with Smart Plug.
How to hard reset (factory reset) RE370K :
You can hard reset your RE370K with ways bellow
Use web interface :
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
Use RESET/WPS button :
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
RE370K default Login & Password, factory settings :
If you have performed a reset of your RE370K device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): TP-LINK_2G_EXT,TP-LINK_5G_EXT
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
RE370K router specifications :
System specs
CPU: n/a
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
1 x Gigabit port
USB-ports: 0
