How to hard reset TL-WA801ND v2 router – Default Login & Password

The TP-LINK TL-WA801ND v2 router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
How to hard reset TL-WA801ND v2 - Default Login & Password

How to hard reset (factory reset) TL-WA801ND v2 :

You can hard reset your TL-WA801ND v2 with ways bellow
Use web interface :
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
Use RESET/WPS button :
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.

TL-WA801ND v2 default Login & Password, factory settings :

Default Gateway IP:
Default username: admin
Default password: admin
Default subnet mask:
Default DNS server:

TL-WA801ND v2 router specifications :

System specs
CPU: 535 MHz
RAM: 32 MiB
Flash: 4 MiB
Custom firmwares: OpenWrt
WiFi: 300mbps (bgn)
WiFi bands
WiFi throughput: n/a
1 x 100mbps port
USB-ports: 0
TP-LINK TL-WA801ND review (quick overview)
Here is the quick comparison of how the TP-LINK TL-WA801ND compares to
other routers on our site
Current price
For a full list of routers and how they compare to the TL-WA801ND v2, check the
Router Buying Guide which will help you buy the most
price-competitive router.

How to login to the TL-WA801ND v2 :

Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.

How to hard reset TP-Link WiFi router