The TP-LINK TL-WDR3600 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
How to hard reset (factory reset) TL-WDR3600 :
You can hard reset your TL-WDR3600 with ways bellow
Use web interface :
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
Use RESET/WPS button :
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
TL-WDR3600 default Login & Password, factory settings :
Default Gateway IP: 192.168.0.1
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
TL-WDR3600 router specifications :
CPU: 560 MHz
RAM: 128 MiB
Flash: 8 MiB
Custom firmwares: OpenWrt
WiFi: 300mbps (abgn)
2.4GHz & 5GHz
WiFi throughput: n/a
1 x Gigabit port
4 x Gigabit ports
TP-LINK TL-WDR3600 review (quick overview)
Here is the quick comparison of how the TP-LINK TL-WDR3600 compares to
other routers on our site
For a full list of routers and how they compare to the TL-WDR3600, check the
Router Buying Guide which will help you buy the most
How to login to the TL-WDR3600 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.