The TP-LINK TL-WPA8630 v2 router has Gigabit WiFi, 3 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1350 Mpbs.
It is also known as the TP-LINK AC1350 Wi-Fi Range extender, AV1300 Powerline Edition.
How to hard reset (factory reset) TL-WPA8630 v2 :
You can hard reset your TL-WPA8630 v2 with ways bellow
Use web interface :
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
Use RESET/WPS button :
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
TL-WPA8630 v2 default Login & Password, factory settings :
If you have performed a reset of your TL-WPA8630 v2 device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): TP-LINK_XXXX,TP-LINK_XXXX_5G
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
TL-WPA8630 v2 router specifications :
System specs
CPU: 750 MHz
RAM: 128 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 1350 Mpbs
WAN
None
ETH
3 x Gigabit ports
USB-ports: 0
