The TP-LINK TL-WR700N router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
How to hard reset (factory reset) TL-WR700N :
You can hard reset your TL-WR700N with ways bellow
Use web interface :
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
Use RESET/WPS button :
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
TL-WR700N default Login & Password, factory settings :
Default Gateway IP: 192.168.0.254
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.254
TL-WR700N router specifications :
RAM: 16 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi throughput: n/a
1 x 100mbps port
How to login to the TL-WR700N :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
How to hard reset TP-Link WiFi router