Forget chugging chug jugs, the coolest way to traverse Fortnite is by building your own sky-faring airship! This guide will equip you with the LEGO know-how to craft a mighty airship, ready to dominate the clouds and leave your opponents drooling with envy.
How to Build an Awesome Airship in LEGO Fortnite
The beauty of this airship design lies in its simplicity. Much like building a boat, you’ll enjoy a spacious deck to roam and intuitive left-right steering for aerial navigation. Plus, the best part? It’s surprisingly easy to assemble, even for novice builders!
Step 1: Laying the Foundation (Literally)
Start by snapping together two Dynamic Foundations. Think of them as your airship’s sturdy bones. A quick push ensures they’re firmly connected – a crucial step to avoid any mid-air mishaps!
Step 2: Building the Steering Corral
Next, create a fence around the left and right sides of your ship, like a corral for your steering controls. Leave the front and back open for now – we’ll fill those gaps later.
Step 3: The Engine Room – A Tricky but Rewarding Puzzle
This is where things get a bit trickier! We need two Dynamic Blocks to serve as our engines. Here’s how to make them:
- Use a tall block and build it as far back as possible, keeping it centered within the corral.
- Use small blocks to build out from the tall block, then add another small block underneath.
- Place a Small Thruster on the small block under the tall block.
- Carefully break all the other blocks in reverse order of how you placed them. If done correctly, you’ll have a single, unattached Dynamic Block with a Small Thruster. Repeat this process on the other side.
Step 4: Taking Flight with Balloons (and a Little Patience)
Now, let’s get this beauty airborne! Place four Small Balloons on each corner of the airship to balance it in the sky.
Pro Tip: Temporarily add a fifth and sixth Small Balloon in the middle front and back. These will slowly lift your airship, but don’t worry, it’ll stabilize after a while.
Step 5: Fine-Tuning Your Flight
With your airship hovering, it’s time to refine its movement. Place two Small Thrusters on the bottom, one on each Dynamic Block. Make sure they’re perfectly centered and symmetrical for balanced upward propulsion.
Step 6: Take Control and Secure Your Engines
Finally, add buttons to control your airship! Place buttons on the left and right blocks for steering, and a central button for adjusting lift. Don’t forget to corral the engines by adding a floor tile as a ceiling and a fence in the back. This ensures they stay put during even the most thrilling aerial adventures.
Congratulations! You’ve built a magnificent LEGO Fortnite airship! Now, customize it, add details, and make it your own. Remember, the sky’s the limit (literally)! So, raise your anchor, fire up those engines, and take to the skies!
Related:
