The D-Link DWR-2010 router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 2600 Mpbs.
It is also known as the D-Link 5G NR Enhanced Gateway.
How to hard reset (factory reset) D-Link DWR-2010 :
You can hard reset your D-Link DWR-2010 with ways bellow
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
D-Link DWR-2010 default Login & Password, factory settings :
If you have performed a reset of your DWR-2010 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
D-Link DWR-2010 router specifications :
System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
n/a
WiFi throughput: 2600 Mpbs
WAN
1 x N/A port
ETH
4 x N/A ports
USB-ports: 0
