How to hard reset MG7310 router – Default Login & Password

The Motorola MG7310 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It is also known as the Motorola 8×4 Cable Modem plus N300 Wi-Fi Router.
How to hard reset MG7310 - Default Login & Password

How to hard reset (factory reset) MG7310 :

You can hard reset your MG7310 with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

MG7310 default Login & Password, factory settings :

Default Gateway IP: 192.168.0.1
Default username: admin
Default password: motorola
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1

MG7310 router specifications :

System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
4 x Gigabit ports
USB-ports: 0

How to login to the MG7310 :

Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.0.1
You should be prompted with a login dialogue.
Enter the username: admin
and the password motorola
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.