The TP-LINK RE200 v1.x router has Gigabit WiFi, 1 100mbps ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 750 Mpbs.
It is also known as the TP-LINK AC750 Wi-Fi Range Extender.
How to hard reset (factory reset) RE200 v1.x :
You can hard reset your RE200 v1.x with ways bellow
Use web interface :
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
Use RESET/WPS button :
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
RE200 v1.x default Login & Password, factory settings :
If you have performed a reset of your RE200 v1.x device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): TP-LINK_Extender_2.4GHz,TP-LINK_Extender_5GHz
Default subnet mask: 255.255.255.0
RE200 v1.x router specifications :
System specs
CPU: n/a
RAM: 64 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 750 Mpbs
WAN
None
ETH
1 x 100mbps port
USB-ports: 0
TP-LINK RE200 review (quick overview)
Here is the quick comparison of how the TP-LINK RE200 compares to
other routers on our site
Average
30/100
Editor
72/100
WiFi
15/100
Hardware
3/100
Current price
$23.99
For a full list of routers and how they compare to the RE200 v1.x, check the
Router Buying Guide which will help you buy the most
price-competitive router.
