The Cisco DDR2200-CL router has 54mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
How to hard reset (factory reset) DDR2200-CL :
You can hard reset your DDR2200-CL with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
DDR2200-CL default Login & Password, factory settings :
Default Gateway IP: 192.168.1.254
Default username: admin
Default password: 1PTV-ADM1N
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.254
DDR2200-CL router specifications :
System specs
CPU: n/a
RAM: 256 MiB + 256 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 54mbps (bg)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
4 x 100mbps ports
USB-ports: 0
How to login to the DDR2200-CL :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.1.254
You should be prompted with a login dialogue.
Enter the username: admin
and the password 1PTV-ADM1N
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
