The Cisco Meraki MR12 router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
How to hard reset (factory reset) Meraki MR12 :
You can hard reset your Meraki MR12 with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Meraki MR12 default Login & Password, factory settings :
Default Gateway IP: 10.128.128.128
Default username: admin
Default subnet mask: 255.255.255.0
Default DNS server: 10.128.128.128
Meraki MR12 router specifications :
System specs
CPU: 400 MHz
RAM: 64 MiB
Flash: 16 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
1 x 100mbps port
USB-ports: 0
Cisco Meraki MR12 review (quick overview)
Here is the quick comparison of how the Cisco Meraki MR12 compares to
other routers on our site
Average
27/100
Editor
64/100
WiFi
6/100
Hardware
11/100
Current price
$11.30
For a full list of routers and how they compare to the Meraki MR12, check the
Router Buying Guide which will help you buy the most
price-competitive router.
How to login to the Meraki MR12 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://10.128.128.128
You should be prompted with a login dialogue.
Enter the username: admin
and if it requires a password, leave it empty or try with admin / password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
