The Cisco RV042G router has No WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
How to hard reset (factory reset) RV042G :
You can hard reset your RV042G with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
RV042G default Login & Password, factory settings :
Default Gateway IP: 192.168.1.1
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
RV042G router specifications :
System specs
CPU: 300 MHz
RAM: 128 MiB
Flash: 32 MiB
Custom firmwares: None
Connectivity
WiFi: No ()
WiFi bands
n/a
WiFi throughput: n/a
WAN
2 x Gigabit ports
ETH
4 x Gigabit ports
USB-ports: 0
Cisco RV042 review (quick overview)
Here is the quick comparison of how the Cisco RV042 compares to
other routers on our site
Average
29/100
Editor
72/100
WiFi
2/100
Hardware
13/100
Current price
$51.98
For a full list of routers and how they compare to the RV042G, check the
Router Buying Guide which will help you buy the most
price-competitive router.
How to login to the RV042G :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.1.1
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.