The Cisco WAP131 router has 300mbps WiFi, 1 N/A ETH-ports and 0 USB-ports.
It is also known as the Cisco Wireless-N Dual Radio Access Point with PoE.
How to hard reset (factory reset) WAP131 :
You can hard reset your WAP131 with ways bellow
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
WAP131 default Login & Password, factory settings :
Default Gateway IP: 192.168.1.245
Default username: cisco
Default password: cisco
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.245
WAP131 router specifications :
System specs
CPU: n/a
RAM: 128 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (abgn)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
1 x N/A port
USB-ports: 0
How to login to the WAP131 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.1.245
You should be prompted with a login dialogue.
Enter the username: cisco
and the password cisco
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.