The D-Link DWL-8220AP rev A1 router has 54mbps WiFi, 2 100mbps ETH-ports and 0 USB-ports.
It is also known as the D-Link Wireless Switch Access Point.
How to hard reset (factory reset) D-Link DWL-8220AP rev A1 :
You can hard reset your D-Link DWL-8220AP rev A1 with ways bellow
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
D-Link DWL-8220AP rev A1 default Login & Password, factory settings :
If you have performed a reset of your DWL-8220AP rev A1 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
D-Link DWL-8220AP rev A1 router specifications :
System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 54mbps (abg)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
2 x 100mbps ports
USB-ports: 0
